Vehicle Repair Tool Centre

Share real vehicle repair cases.

Which BMW key programmer is best for you?

BMW key lost or need a clone? which BMW key programmer to use? When you plan to buy a BMW key programmer online, have you wonder which key programmer do I know? Have you ask yourself or your friends like this “among these BMW key programmer supplied by the seller, which one should I buy”? In the following parts, I will list some BMW key programmers, and generally tell you their similarities and differences. keyfobs2 CGDI BMW   1.High technical tool which mainly support Auto diagnose, programming and security maintenance 3 in 1. 2.Support Key Programming for BMW CAS1/CAS2/CAS3, and Support Key Matching and All key lost for CAS4 /CAS 4+; 3. Support BMW Key Programming with OBD Functions 4. Software response fast, short time programming, and new breakthrough in operation safety and technical support. AK90 Key Programmer AK90+ For All BMW EWS Newest AK90 BMW KEY-PROG V3.19 is a safe and effecitive key match tool for BMW EWS system. It covers EWS2.1/EWS2.2/EWS3/EWS3.3/EWS4/EWS4.4,can read all

continue reading
1 readers |0 Comments|Reply

How to use Kess V2 to disable DPF for Mercedes Sprinter 315 Biturbo

by keycuttingmachine - Apr 21, 2018 - Kess v2

This article show the guide on how to use Kess v2 ECU programmer to disable DPF for Mercedes sprinter 315 biturbo What is DPF? A diesel particulate filter (or DPF) is a device designed to remove diesel particulate matter or soot from the exhaust gas of a diesel engine. ECU Remap What is DPF removal? From February 2014 the inspection of the exhaust system carried out during the MoT test will include a visual check for the presence of a DPF. A missing DPF, where one was fitted when the vehicle was built, will result in an MoT failure. DPF off Mercedes with Kess v2, any success? Yes, look here: DPF off Mercedes Sprinter 315 biturbo with Kess v2 master Any other solutions of Mercedes DPF off? Yes, download Professional DPF+EGR Remover 3.0: (also done with Ktag or Kess)!zV1USZZL!X2mHnpX3Xc09sqYXlOAVgw Mercedes ECU listed: EDC16C31, Delphi DCM3.4, EDC16C31 Vito and Type2, EDC16CP36, EDC16C3, EDC16C31(2011+)EDC17CP10,M55 Error fixer

continue reading
1 readers |0 Comments|Reply

OBDSTAR X300 DP VS XTOOL X100 PAD2 comparison table

by keycuttingmachine - Apr 17, 2018

In order to make you clear the difference between new arrival OBDSTAR X300 DP and XTOOL X100 PAD2, here give you a comparison table as below:




OBDSTAR X300 DP is superior to XTOOL X100 PAD 2 in many aspects, such as faster CPU, bigger RAM, long lasting battery and higher resolution.

OBDSTAR X300 DP has Bluetooth and One Key Enter functions while XTOOL X100 PAD 2 cannot support. OBDSTAR X300M

For OBDSTAR X300 DP it’s no need to inquiry pin code, but XTOOL X100 PAD 2 need inquiry manually.

And most important is that XTOOL X100 PAD 2 can only allow you to diagnose the basic four systems, but with OBDSTAR X300 DP you can diagnose all systems!


OBDSTAR X300 DP full package

Immobilizer+ odometer adjustment+ EEPROM/PIC adapter+ OBDII+ ABS+ TPS+ SRS reset+ TPMS(low tire)reset+ Steering angle reset+ CVT learning/Value reset+ EPB+ Oil/service rese

continue reading
1 readers |0 Comments|Reply

Launch Easydiag 3.0 Update Version of Launch Easydiag 2.0

Recently,Launch X431 co.Ltd released their new product Launch Easydiag 3.0 plus,the update version of Launch Easydiag 2.0. Here UOBD2 make a compare between Launch Easydiag 3.0 and 2.0  

    LAUNCH Easydiag 3.0 Plus LAUNCH Easydiag 2.0 Plus
Image    LAUNCH Easydiag 3.0 Plus LAUNCH Easydiag 2.0 Plus
Price   $165 with 2 free car software $180 with 2 free car software
Function Read and clear codes  
view enhanced live data  
Systems Engine
Coverage Asian makes
European makes
North American makes
  Customizable software 2 free vechicles software+DEMO+EOBD 2 free vechicles software+DEMO+EOBD
Update    Online for 1-year free  Online for 1-year free 
Language   Multi-language available  Multi-language available 


continue reading
1 readers |0 Comments|Reply

How to use OBDSTAR X300 DP PAD OBDII Diagnosis Function?

by keycuttingmachine - Apr 03, 2018

This is an OBDSTAR X300 DP PAD Programmer user manual, from vci connection to auto obdii diagnosis. The most details for you all, especially for newbies.

obdstar x300 pro3 key master

VCI connector connection

  1. Locate vehicle’s DLC socket. The DLC (Data Link Connector or Diagnostic Link Connector) is the standardized 16‐cavity connector where diagnostic code readers interface with the vehicle’s on‐board computer. The DLC is usually located 12 inches from the center of the instrument panel (dash), under or around the driver’s side for most vehicles. If Data Link Connector is not located under dashboard, a label should be there telling location. For some Asian and European vehicles, the DLC is located behind the ashtray and the ashtray must be removed to access the connector. If the DLC cannot be found, refer to the vehicle’s service manual for the location.
  2. Plug the VCI diagnostic connector into the vehicle’s DLC socket (It is suggested to use the OBD 2 extension cable to connect VC
continue reading
1 readers |0 Comments|Reply

SEC-E9 to cut Toyota TOY43 keys in 2 ways?

by keycuttingmachine - Mar 31, 2018 - SEC-E9

Post on how to cut Toyota TOY43 keys with SEC-E9 automatic key cutting machine in 3 steps: Enter the key data, get the key number and cut the key. Guide:

  1. Enter the key data of Toyota TOY43 in two ways.Way 1: Select car manufacture, brand and year.

Step 3. Cut a new Toyota Camry key. Tap the “Cut” button to enter the cutting page. Select “NKI-silver” as speed and the most right blue icon as sense key location. Take out the original key and fix a new key blank on the top level of the clamp. Please pay attention to the key position. Tap “cut” button to start cutting a new key. Please remember to close the safe gate. SEC-E9 Cutting is done. Open the safe gate. Clean the clamp & the new keys. Take out the new key. The new key is working well.

continue reading
1 readers |0 Comments|Reply

SBB Key Programmer Register Nissan Note 2007 Chip Key

This is a Nissan Note 2007  (automatic, right wheel, Intelligent Key). There is a working key, customer need to add chip key startup..So this post show the guide on how to register chip key for Nissan Note 2007 by SBB Key Programmer.

  But the car has a sticker, so the chip should be registered with the device SBB Key Programmer.  PIN will be assumed by the label BCM, with the help of the program AD600 Code Wizard Pro (Demo the Version) , which can be downloaded at this  link. Or by hand-held Nissan Pin code reader NSPC001.   To perform this procedure, you’ll need:
  • Net HITAG 2 transponder – PCF7936.
  • Wires (jumpers), for supplying power to the ignition contacts.
1. Insert the device connector SBB v46.02 in OBDII vehicle. 2. The instrument select NISSAN JAPANthe MICRA MARCH 00-Gasoline   7. Insert keys to be programmed in sequence and turn them on and off for 5 sec respectively. In the end start the engine for some sec. Press any key … Press – Insert the key continue reading
1 readers |0 Comments|Reply

OBDSTAR X300DP Adjust Mileage for Cadillac ATSL 2016

OBDSTAR X300 DP PAD tablet Key Programmer not only play with programming keys but also some special functions like program ECU , read Pin code, adjust Mileage etc. Really a higher level diagnostic tool for workshop or dealer. Here is step by step procedure of changing mileage for Cadillac ATSL 2016. Device: OBDSTAR X300DP PAD Tablet Key Programmer Vehicle: -Cadillac ATSL 2016 Step1: Prepare Connect X300DP with vechile and open X300DP Press on START button Step2: Choose vehicle information Choose “Mileage adjust” option and click on GM Choose GM V30.45 to go on Then choose Cadillac Choose ATS2013- Mileage adjustment (correction) It is communicating... Step3: Adjust mileage The current mileage information Input the new mileage and press ENTER to continue Value: 3061 It is communicating... The mileage value at present Done! Successfully change mileage for Cadillac ATSL 2016 More info about OBDSTAR X300 DP,pls visit:

continue reading
1 readers |0 Comments|Reply

CARPROG Full ECU Chip Tunning Feedback

This post collects all of available customer feedback on CARPROG Full ECU Chip Tunning. Hope it helps!

 this is a good program to start. CARPROG full v7.28 with everything and explained in the software, and it comes with several connectivity number. As selecting a function that we want to use it tells us what connectors used. It is even illustrated with photos very nice.Car Key programemr Question: You have a merchant recommend? a Chinese version is it the case? Reply: They are well and have a very proper customer relationship

it must be used with a PC without internet with a stable and xp ca va … Super good tools began frankly I’m very happy easy to use but it’s still the lolll brol as a tool that makes This article from:

continue reading
1 readers |0 Comments|Reply

What Devices Support VW MQB System Programming

Here are 3 programmers that can support VW MQB system programming:OBDSTAR X300 DP PAD,OBDSTAR X300M and Xhorse VVDI2. OBDSTAR X300 DP PAD X300 DP PAD not only support VW MQB programming,but also work on BMW FEM/BDC system programming.OBDSTAR X300 DP is the first tablet of OBDSTAR, which has reached a higher level in key programming and diagnosis. Inheriting from OBDSTAR professional auto programming and advanced diagnosing technology, X300 DP is characterized by covering wide range of vehicles, featuring powerful function, and providing superior quality.

OBDSTAR X300M OBDSTAR X300M is the most professional device for odemeter adjustment,which coverage conprehensive car model.Main unit system of OBDSTAR X300M adopts ARM high speed chip to keet it running stable,fast and anti-jamming.This product can support VW MQB system odometer correction.

Xhorse VVDI2 VVDI2 Full Version comes with Basic Function + VW + BMW + Porsche+PSA+ AUDI Generation 5 Function+BMW OBD Fucntion+BMW CAS4+

continue reading
1 readers |0 Comments|Reply